service hotline



Name: ADD-155
Product catalog: UPS Battery charger power supply

Print this Page        Skype Online

E-mail Us                QQ

Whatsapp               wangwang

Facebook                Youtube

155W Dual Output with Battery Charger (UPS Function) ADD-155 series
Universal AC input / Full range
Built-in active PFC function
Protections: Short circuit / Overload / Over voltage
Battery low protections
Cooling by free air convection
100% full load burn-in test
Fixed switching frequency at PFC 67KHz, PWM 134KHz
2 years warranty

Output number CH1 CH2 CH3 CH1 CH2 CH3 CH1 CH2 CH3
DC voltage 13.8V 5V 13.3V 27.6V 5V 27.1V 54 V 5 V 53.5 V
Rated Current 9.5A 3A 0.5A 4.5A 3A 0.5A 2.3A 3A 0.2A
Current Range 0~10.5A 0~3A  -------- 0~5A  0~3A --------- 0~2.5A 0~3A ---------
Rated Power 152.75W 152.75W 149.9W
Ripple & Noise 150mVp-p 100mVp-p -------- 200mVp-p 100mVp-p ------- 240mVp-p 100mVp-p --------
Voltage Adj. Range CH1:12~14.5V CH1:24~29V CH1:48~58V
Voltage Tolerance ±2.0% ±3.0% -------- ±1.0% ±3.0% -------- ±1.0% ±5.0% --------
Line Regulation ±1.0% ±0.5% -------- ±1.0% ±0.5% -------- ±1.0% ±0.5% --------
Load Regulation ±1.0% ±2.0% -------- ±1.0% ±2.0% -------- ±1.0% ±2.0% --------
Setup, Rise Time 1000ms, 90ms/230VAC          2000ms, 90ms/115VAC at full load
Hold Up Time  24ms/230VAC          20ms/115VAC at full load
Voltage Range 88~264VAC   47~63Hz; 124~370VDC
AC Current 2.5A/115VAC   1.5A/230VAC
Efficiency 78% 81% 81%
Inrush Current Cold start 20A/115VAC   40A/230VAC 
Leakage Current <1mA /240VAC
Over Load CH1,CH2:105 ~ 135%          CH3:0.51 ~ 0.9A rated output power  
Protection type: AC Charging Mode: Hiccup mode, recovers automatically after fault condition is removed UPS Mode: Protected by internal fuse
Over Voltage CH1:15.87~18.63V CH1:31.74~37.26V CH1:62.1~72.9V
Protection type: Hiccup mode, recovers automatically after fault condition is removed 
Battery Low 10V±0.8V 19.5V±1.5V 39V±2V
Working Temp. -10~+60℃ (Refer to “Derating Curve”) 
Working Humidity 20~90%RH non-condensing
Storage Temp., Humidity -20~+85℃,10~95%RH
Temp. Coefficient ±0.03%/ ℃(0~50℃ )on CH1 output
Vibration 10~500Hz,2G10min./1cycle,60min.each along X, Y,Z axes 
Safety Standards Design refer to UL60950-1, TUV EN60950-1 
Withstand Voltage I/P-O/P:3KVAC   I/P-FG:1.5KVAC   O/P-FG:0.5KVAC 
Isolation Resistance I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500VDC /25℃ /70%RH 
EMC Emission Compliance to EN55022(CISPR22) Class B, EN61000-3-2,-3 
EMC Immunity Compliance to EN61000-4-2,3,4,5,6,8,11,EN55024,light industry level, criteria A 
Dimension 119*11*50mm(L*W*H)
Weight 1Kg
Packing 16pcs/16Kg/0.95CUFT
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.
4.The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

If you have any enquiry about quotation or cooperation , please feel free to email us at or use the following enquiry form . Our sales representative will contact you within 24 hours. Thank you for your interest in our products.