Email: Leyu@leyuelec.com

service hotline

0086-577-62998958

0086-18906669219

Skype
DRP-240
Name: DRP-240
Product catalog: Din rail power supply (DR and MDR)

Print this Page        Skype Online

E-mail Us                QQ

Whatsapp               wangwang

Facebook                Youtube

Wechat
240W Single Output Industrial DIN Rail Power Supply   DRP-240 series
Features:
Universal AC input/ full range 
Built-in active PFC function 
Protections: Short circuit/ Over load/ Over voltage/ Over temperature 
Cooling by free air convection 
Can be installed on DIN rail TS-35/7.5 or 15 
LED indicator for power on 
100% full load burn-in test 
Fixed switching frequency at 100KHz 
2 years warranty

SPECIFICATIONS  
OUTPUT  
Model DR-240-24 DR-240-48
DC Voltage  24V 48V
Rated Current  10A 5A
Current Range  0-10A 0-5A
Rated Power  240W 240W
Ripple & Noise  80mVp-p 150mVp-p
Voltage Adj. Range  24-28V 48-53V
Voltage Tolerance  ±1% ±1%
Line regulation ±0.5% ±0.5%
Load regulation ±1% ±1%
Setup, Rise Time  800ms,40ms/230VAC   800ms,40ms/115VAC at full load
Hold Up Time  24ms/230VAC   24ms/115VAC at full load
   
INPUT  
Voltage Range  85~264VAC   47~63Hz; 120~370VDC
AC Current 2.8A/115V   1.4A/230V
Efficiency 84% 85%
Inrush Current  Cold start 27A/115VAC   45A/230VAC
Leakage Current <3.5mA/240VAC
   
PROTECTION  
Over Load  105%~150% rated output power
Protection type: Constant current limiting, recovers automatically after fault condition is removed
Over Voltage  30-36V 54-60V
Protection type: Shut down o/p voltage, re-power on to recover
Over Temp. Protection type: Shut down o/p voltage, recovers automatically after temperature goes down
   
ENVIRONMENT  
Working Temp., Humidity -10℃~+70℃; 20%~90%RH non-condensing
Storage Temp., Humidity -20℃~+85℃; 10%~95%RH
Vibration 10~500Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes
   
SAFETY  
Withstand Voltage I/P-O/P: 3KVAC   I/P-FG: 1.5KVAC   O/P-FG: 0.5KVAC
Isolation Resistance I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC
   
STANDARD  
Safety Standard Design refer to UL508,UL60950-1, TUV EN60950-1
EMC Standard EN55011,EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11,ENV50204,EN55024,EN61000-6-2(EN50082-2), heavy industry level, criteria A
   
OTHERS  
Dimension 125.5*125.2*100mm(W*H*D)
Weight 1.2Kg
Packing 12pcs/15.5Kg/1.29CUFT
   
NOTE  
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1μf & 47μf parallel capacitor. 
3 .Tolerance: includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
5 . Derating may be needed under low input voltages. Please check the derating curve for more details

If you have any enquiry about quotation or cooperation , please feel free to email us at Leyu@leyuelec.com or use the following enquiry form . Our sales representative will contact you within 24 hours. Thank you for your interest in our products.