service hotline



Name: HLG-240H
Product catalog: Waterproof led driver

Print this Page        Skype Online

E-mail Us                QQ

Whatsapp               wangwang

Facebook                Youtube

240W Single Output Waterproof Switching Power Supply   HLG-240H series
•Universal AC input/ full range
•Built-in active PFC function
•100% full load burn-in test
•Protections: Short circuit/ Over load/ Over voltage
•IP67 design for indoor or outdoor installations
•Suitable for LED lighting and street lighting application
•Compliance to worldwide safety regulations for lighting
•Suitable for dry/damp/wet locations
•2 year warranty
Model HLG-240H-12 HLG-240H-15 HLG-240H-20 HLG-240H-24 HLG-240H-30 HLG-240H-36 HLG-240H-42 HLG-240H-48
DC Voltage 12V 15V 20V 24V 30V 36V 42V 48V
Rated Current 16A 15A 12A 10A 8A 6.7A 5.72A 5A
Constant Current Region 6-12V 7.5-15V 10-20V 12-24V 15-30V 18-36V 21-42V 24-48V
Rated Power 192W 225W 240W 240W 240W 241.2W 240.24W 240W
Ripple & Noise 150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p 250mVp-p 250mVp-p 250mVp-p
Voltage Tolerance ±2.5% ±2% ±1% ±1% ±1% ±1% ±1% ±1.0%
Line Regulation ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5%
Load Regulation ±2% ±1.5% ±1% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5%
Setup, Rise Time 1000ms,80ms/115VAC     500ms,80ms/230VAC at full load
Hold Up Time 15ms at full load 230VAC/115VAC
Voltage Range 90~305VAC       127~431VDC     frequency:47~63 Hz
AC Current 4A/115 VAC     2A/230VAC      1.2A/277VAC
Power Factor PF>0.98/115VAC,PF>0.95/230VAC at full load
Efficiency 90% 90% 91.50% 92.50% 92.50% 92.50% 92.50% 93%
Inrush Current Cold start 75A at 230VAC
Leakage Current <0.75 mA/277VAC
Over Load 95%-108%
Protection type: Constant current limiting, recovers automatically after fault condition is removed
Over Voltage(V) 13.5-18V 17.5-21.5V 23.5-27.5V 27-34V 33-39V 43-49V 48-54V 55-63V
Protection type: Shut down o/p voltage, re-power on to recover
Over Temp. Shut down o/p voltage, recovers automatically after temperature goes down.
Working Temp. Humidity -40℃~+70℃; 20%~90 %RH
Storage Temp. Humidity -40℃~+80℃; 10%~95 %RH
Temp. Coefficient ±0.03%/℃(0~50℃)
Vibration 10~500Hz, 5G 12min./1cycle, period for 72min, each along X, Y, Z axes
Withstand Voltage I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG: 1.5KVAC
Isolation Resistance I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC/25℃/70%RH
Safety Standard UL1012,CAN/CSA-C22.2 No.107.1-01, TUV EN60950-1,IP67 Approved
EMC Standard EN55015,EN55022, EN61000-3-2,EN61000-4-2,3,4,5,6,8,11;ENV61547,EN55024
Dimension 244.2*68*38.8mm (L*W*H)
Weight 1.3Kg/pc 12pcs/16.6kg/0.84CUFT
NOTE 1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor. 
3. Tolerance: includes set up tolerance, line regulation and load regulation. 
4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

If you have any enquiry about quotation or cooperation , please feel free to email us at or use the following enquiry form . Our sales representative will contact you within 24 hours. Thank you for your interest in our products.