service hotline



Name: DR-30
Product catalog: Din rail power supply (DR and MDR)

Print this Page        Skype Online

E-mail Us                QQ

Facebook               wangwang

30W Single Output Industrial DIN Rail Power Supply   DR-30 series
Universal AC input/ full range
Protections: Short circuit/ Over load/ Over voltage
Cooling by free air convection 
Can be installed on DIN rail TS-35/7.5 or 15
Isolation classⅡ
LED indicator for power on
100% full load burn-in test
2 years warranty
Model DR-30-5 DR-30-12 DR-30-15 DR-30-24
DC Voltage  5V 12V 15V 24V
Rated Current  3A 2A 2A 1.5A
Current Range  0-3A 0-2.5A 0-2A 0-1.5A
Rated Power  15W 24W 30W 36W
Ripple & Noise  80mVp-p 120mVp-p 120mVp-p 150mVp-p
Voltage Adj. Range 4.75-5.5V 10.8-13.2V 13.5-16.5V 21.6-26.4V
Voltage Tolerance  ±2% ±1% ±1% ±1%
Line regulation ±1% ±1% ±1% ±1%
Load regulation ±1% ±1% ±1% ±1%
Setup, Rise, Hold Up Time  100ms,30ms/230VAC   100ms,30ms/115VAC at full load
100ms/230VAC         21ms/115VAC at full load
Voltage Range  85~264VAC   47~63Hz; 120~370VDC
AC Current 0.88A/115V   0.48A/230V
Efficiency 74% 81% 82% 83%
Inrush Current  Cold start 15A/115V   30A/230V
Over Load  105%~160% rated output power
Protection type: Constant current limiting, recovers automatically after fault condition is removed
Over Voltage  5.75-6.75V 13.8-16.2V 17.25-20.25V 27.6-32.4V
Protection type: Shut down o/p voltage, re-power on to recover
Working Temp., Humidity -20℃~+60℃; 20%~90% RH non-condensing
Storage Temp., Humidity -40℃~+85℃; 10%~95%RH
Temp. Coefficient ±0.03%/℃(0~50℃)
Vibration 10~500Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6
Withstand Voltage I/P-O/P: 3KVAC
Isolation Resistance I/P-O/P: 100M Ohms / 500VDC/25℃/70% RH
Safety Standard Design refer to UL60950-1,TUV EN60950-1,EN50178
EMC Standard Design refer to EN55011,EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11,EN55024,EN61000-6-2,EN61204-3, heavy industry level, criteria A
Dimension 78*93*56mm(W*H*D)
Weight 0.27Kg
Packing 48pcs/14Kg/1.02CUFT
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor. 
3.Tolerance: includes set up tolerance, line regulation and load regulation.
4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

If you have any enquiry about quotation or cooperation , please feel free to email us at or use the following enquiry form . Our sales representative will contact you within 24 hours. Thank you for your interest in our products.