service hotline



Name: DR-60
Product catalog: Din rail power supply (DR and MDR)

Print this Page        Skype Online

E-mail Us                QQ

Facebook               wangwang

60W Single Output Industrial DIN Rail Power Supply   DR-60 series
Universal AC input/ full range 
Protections: Short circuit/ Over load/ Over voltage 
Cooling by free air convection 
Can be installed on DIN rail TS-35/7.5 or 15 
Isolation classⅡ 
LED indicator for power on
100% full load burn-in test 
2 years warranty
Model DR-60-5 DR-60-12 DR-60-15 DR-60-24
DC Voltage  5V 12V 15V 24V
Rated Current  6.5A 4.5A 4A 2.5A
Current Range  0-6.5A 0-4.5A 0-4A 0-2.5A
Rated Power  32.5W 54W 60W 60W
Ripple & Noise  80mVp-p 120mVp-p 120mVp-p 150mVp-p
Voltage Adj. Range 4.75-5.5V 11.1-13.2V 13.5-16.5V 21.6-26.4V
Voltage Tolerance  ±2% ±1% ±1% ±1%
Line regulation ±1% ±1% ±1% ±1%
Load regulation ±1% ±1% ±1% ±1%
Setup, Rise Time  100ms,30ms/230VAC   200ms,30ms/115VAC at full load
Hold Up Time  100ms/230VAC   23ms/115VAC at full load
Voltage Range  88~264VAC   47~63Hz; 124~370VDC
AC Current 1.2A/115V   0.8A/ 230V
Efficiency 76% 82% 83% 84%
Inrush Current  Cold start 18A/115V   36A/230V
Leakage Current <1mA/240VAC
Over Load  105%~160% rated power
Protection type: Constant current limiting, recovers automatically after fault condition is removed
Over Voltage  5.75-6.9V 13.8-16.2V 17.25-20.25V 27.6-32.4V
Protection type: Shut down o/p voltage, re-power on to recover
Working Temp., Humidity -20℃~+60℃; 20%~90% RH non-condensing
Storage Temp., Humidity -40℃~+85℃; 10%~95% RH
Temp. Coefficient ±0.03%/℃(0~50℃)
Vibration 10~500Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes
Withstand Voltage I/P-O/P: 3KVAC
Isolation Resistance I/P-O/P: 100M Ohms / 500VDC
Safety Standard Design refer to UL60950-1,TUV EN60950-1,EN50178 
EMC Standard Design refer to EN55011,EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11,EN55024,EN61000-6-2,EN61204-3, heavy industrial level, criteria A
Dimension 78*93*56mm(W*H*D)
Weight 0.3Kg
Packing 48 pcs/carton/15.4KG/1.02CUFT
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor. 
3.Tolerance: includes set up tolerance, line regulation and load regulation.
4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

If you have any enquiry about quotation or cooperation , please feel free to email us at or use the following enquiry form . Our sales representative will contact you within 24 hours. Thank you for your interest in our products.