service hotline



Name: SCN-800
Product catalog: PFC function power supply

Print this Page        Skype Online

E-mail Us                QQ

Facebook               wangwang

800W Single Output with Parallel Function   SCN-800 series
High reliability, low ripple
AC input range selected by switch
Protections: Short circuit/ Over load/ Over voltage/ Over temperature
Built-in remote ON-OFF control and remote sense function
With parallel function
Can adjust from 20%~100% output voltage by external control 1-5V
Forced air cooling by built-in DC fan
2 years warranty

MODEL SCN-800-12 SCN-800-15 SCN-800-24 SCN-800-48
DC Voltage  12V 15V 24V 48V
Rated Current 66A 54A 33A 16.6A
Current Range 0-66A 0-54A 0-33A 0-16.6A
Rated Power 800W 800W 800W 800W
Ripple & Noise 150mVp-p 150mVp-p 240mVp-p 480mVp-p
Voltage Adj. Range ±5%; Can adjust from 40%~100% output voltage by external control 2-5V
Voltage Tolerance ±1% ±1% ±1% ±1%
Setup, Rise, Hold Up Time 800ms, 50ms, 16ms at full load
Voltage Range 90~130VAC/180~260VAC selected by switch   47~63Hz; 260~370VDC
AC Current 13A/115VAC   8.0A/230VAC
Efficiency 80% 81% 85% 87%
Inrush Current 60A/230V
Leakage Current 3.5mA/240VAC
Over Load 110%~135%
Protection: Protection: Current limiting, delay shut down o/p voltage, re-power on to recover
Over Voltage 110%~135%
Protection type: Shut down o/p voltage, re-power on to recover
Over Temp TSW1 (Power transistor) When temp. >100℃, shut down o/p voltage, re-power on to recover
Working Temp., Humidity -10℃~+65℃; 20%~90%RH
Storage Temp., Humidity -20℃~+85℃; 10%~95%RH
Vibration 10~200Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes
Withstand Voltage I/P-O/P, I/P-FG:1500VAC
Isolation Resistance I/P-O/P, I/P-FG, >100M Ohms / 500VDC
Safety Standard Design refer to UL1950,CSA22.2,IEC60950
EMC Standard Design refer to FCC Part 15 Class A
Dimension 291*132*68mm(L*W*H)
Weight 2.57Kg
Packing 6pcs/15.42kg/CARTON
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor. 
3. Tolerance: includes set up tolerance, line regulation and load regulation. 
4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

If you have any enquiry about quotation or cooperation , please feel free to email us at or use the following enquiry form . Our sales representative will contact you within 24 hours. Thank you for your interest in our products.